Okay here are step by step instructions to reset your vehicle.
STEP 1: Ensure all vehicle doors are closed and locked.
STEP 2: turn the ignition OFF
STEP 3: turn ignition ON, you will see the red SRS notification light turn on.
STEP 4: press the R button 3 times, located in the middle of the speedometer infront of the steering wheel. This will give you the vehicle voltage.
STEP 5: Press the up arrow on the steering wheel until you see the service option expressed on the screen between your speedometer.
Step 6: use the minus - button on the right side of your steering wheel to scroll down to select the CONFORMATION option.
Step 7: select the bottom left button on the left side of the steering wheel to proceed forward. Press a second time to select the FULL SERVICE option on the screen.
Step 8: you will now see SERVICE CONFERMED expressed on the screen. Next push the bottle left button on the left side of the steering wheel to advance forward bring up the service menue again.
Step 9:Turn off ignition and remove your key.
Step10: Turn ignition back ON to confirm that the SRS LIGHT is off.
